Please review the following options and guidelines
GETTING STARTED / SETUP
Now that you're ready to custom-order a design made to fit, all that's required at this end is a couple images of the car from you: 1) a profile which features the full side of the body, 2) an isometric view from the front will work perfectly. After those images are received, they will be setup and returned to you with lines and markups. You will then just return the solutions in an e-mail. Following this, is the design phase where everything is made to fit your model.
- Profile / Side view reference
Here is a good example of a side profile image of the body, one that I can work well from.
- Profile / Side view reference with setup marks
As seen here, the setup marks have been placed upon the image and to send back to you for the dimensions which the solutions can in turn be sent back through e-mail.
- Isometric top frint view
This type of reference image is required so that I can see what the nose cone assembly looks like, and will help in better understanding the full geometry of the body.
- Profile / Side view with setup markings
This illustrations shows what the setup marks look like once sent out.
- 3 views
In this image, I was able to collect 3 angles of the body. Two will do, however this makes it easier for setup mark calculations and references.
- Profile / Side view with setup marks
Different body style, different dimensions. These are invaluable to making everything fit just right.
- Profile / Side view reference with setup markings
Here yet is another example of the setup markings.
- Profile / Side view with setup markings
And yet again. The more accurate you can be, the better the final results.
- Profile / Side view with setup markings
- Final print size
It is always better to be oversized than to run short. As such, I add extra material to the master print so that you need only trim off the excess. The image referenced here is a sample of that oversizing, and varies depending on body style.
- Master Print File
Here is what the final master looks like before editing to a rip file. The graphic is generally printed as a left and right, and installation starts right down the center of the top, then working down the sides of the body.
Click on tabs below for full details
This Premium option is a 4 color custom-order process onto 5 year 3M IJ-3510 media. It is engineered to work perfectly across smooth, flat and simple curved surfaces. This format requires a wet installation.
The difference between the Premium, and the Premium + is in the media and the processing.
The Premium+ custom-order option goes through a 6 color process, and one I would highly recommend. It offers a wider, richer spectrum of colors onto 3M IJ-180-CV3 or ARLON 6100XLP 'wrap' media. This combination offers excellent trouble free installation onto any and all smooth and organic surfaces, and easily conforms over bull-nose edges, indentation, extrusions, panel overlaps and of course the nose cone. Finally, it is finished with a matching UV stabilizing lense-clear gloss over-laminate.
Thess specialized formats known as 'Controltac' and/or 'X-Scape' are conformable, and stretches up to 130% without primer and will not lift and no shrinking after install, cracking, or edge lifting. If stretched too far or repositioning is needed, snap up on portions of the panel and the film quickly recovers (with applied heat) so panels can be saved - great for redo’s.
Formulated for Dry installation. Never use liquids of any sort as it is not required with these specialty wraps.
All print material, including the solvents, are rated UV inhibiting. And from my personal professional experience, the colors stay bright and true for a decade.
What you need to do:
1) Send in some reference images for markup. Also include which design you have chosen. If applicable to your package, please include driver's name and race number.
2) Next, click on the SETUP tab in the side bar. The setup fee is marginal in terms of time spent setting up the design file to fit your body style.
3) Now we're off to the races! And once you receive your finished proof, you can then select your option for processing.
Upon receipt, open your custom-order package carefully from either end, then slide the contents out. Open the roll and lay the prints flat for a few hours so they can relax, after-which you can begin the installation.
Pending workload, turnover for setup is generally from about five days. Processing takes 3 more after your approval, so prints are usually ready to ship within a week and carefully packaged in a hard cardboard tube for the safest journey to your door.
When installing your custom-order, be sure that your working environment is free from dust, debris or contaminants. You're as good as your base, so be certain that the panels you will be applying onto are dust and grease free. A soap and water bath is a good start followed by wiping the panels down with rubbing alcohol just prior to applying them. This will insure ultimate adhesion. If you prefer to 'hire-out' for the installation, most local sign shops have a staff member that is familiar with the procedures.
*Always get at least two estimates before you commit.
'Limited Time Special Offer - Extended'
Order today and get the Premium + package including setup (from stock designs) for just 562.00
Simply select your wrap design from the drop-down box below, then add to cart.
You can use the links below to review your selection by title before checking out.
AFTERGLOW
CMR CLAYMORE
CMR CLAYMORE STARDUST 1
CMR CLAYMORE STARDUST 2
CMR CLAYMORE STARDUST 3
CMR CLAYMORE STARDUST 4
CMR CLAYMORE STARDUST 5
CMR CLAYMORE STARDUST 6
CMR CLAYMORE STARDUST 7
CMR CLAYMORE STARDUST 8
CMB-v1 COMBUSTION
CMB-v2 COMBUSTION
CMB-v3 COMBUSTION
CMB-v4 COMBUSTION
CMB-v5 COMBUSTION
CMB-v6 COMBUSTION
CMB-v7 COMBUSTION
COUNTRY BUMPKIN
CWVR CHAOS WEAVER
DGNFR DRAGONFIRE
DGNSLR DRAGON SLAYER
DRAGON SCALES
DREAMWEAVER
EP-1-GP ELECTROPULSE
FNK-JR FRANK Jr.
FTL-D FATAL DISTRACTION
FULMINATOR
GNS GENESIS
GRIFFIN
GTJC GOT JUICE
ILLUSIONS
ILLUSIONS-EXT
INVDRZ-v1 INVADERS
INVDRZ-v2 INVADERS
Jr.Patriot
JUDGMENT DAY
Lazer Blade
Lazer Blade-v2
Lil' Monster
MAJ-SLD MAJIX
MAJ-V1 MAJIX
MAJ-V2 MAJIX
MAJ-V3 MAJIX
MAJ-V4 MAJIX
MAJ-V5 MAJIX
MAJ-V6 MAJIX
MXFNT MOXYFLINT
MUNSTERZ
NEON KNIGHT NK-BL
NEON KNIGHT NK-GRN
NEON KNIGHT NK-PK
NEON KNIGHT NK-PPL
NGFK NEONOGRAFIK
POW MIA
REAPER
SPIRES
SPITFIRE
SPITFIRE FLAMED
SPRINGSTAR
SRTNS SPARTANS
STRRDR STAR RIDER
TDWR-GH-THUNDERWEAR
TDWR-KV4 THUNDERWEAR
TDWR-KV5 THUNDERWEAR
The BEAST
THUNDERWEAR 1
TDWR-4 THUNDERWEAR
TDWR-KV1 THUNDERWEAR
TDWR-KV2 THUNDERWEAR
TDWR-KV3 THUNDERWEAR
TDWR-3 THUNDERWEAR
TDWR-2 THUNDERWEAR
TCO TOCO RACING
TDZ-v1 TIE DYED ZEBRA
TWSTR TWISTER
VMTR VENOMATOR
ZOMBIE RAGE
ZUS ZEUS
SELECT A TAB BELOW TO PLACE YOUR ORDER
PREMIUM+
For solid bodies and organic shapes
Premium + Package
custom-order
$615.00 + shipping
PREMIUM
Best suited for flat panneled surfaces that don't have many strong curves
Premium Package
$489.00 + shipping
SETUP
It all begins here.
Basic setup charge $149.00